Are you looking for:

Dayton & Dual Wheel Adapter for Big Truck Tire Step - (Adapter Bar Only)

The 5950 Dual Wheel Adapter must be used when using the Big Truck Tire Step on Dayton and dual wheels.

This adapter provides extra stability by resting against the tire when there is no rim to rest against. The Dual Wheel Adapter is included with the 5800 Super Single 2-Step and the 5300 Super Single 3-Step.

The Dual Wheel Adapter can be easily attached to any Big Truck Tire Step by sliding the adapter’s two attachment posts over the step’s rear stabilizing posts. Secure the adapter with the included screws and nuts.

Super Single Model numbers 5800 and 5300 come pre-drilled for the adapter. If using the dual wheel adapter with model numbers 5500 or 5100 you must: 1) Remove vinyl caps. 2) Slide on adapter and mark hole placement. 3) Drill holes in the stabilizing posts. 4) Attach Dual Wheel Adapter.

*Note: This is the adapter bar only. Steps are sold separately.

Tiger Tool Axle Shaft Puller - Medium & Heavy Duty Drive Axles

With the Tiger Tool Axle Shaft Puller you can easily remove even the most seized axle shaft in minutes. The Tiger Tool Axle Shaft Puller works on vehicles ranging from medium-duty up to heavy-duty fitted with Dana, Eaton, or Rockwell drive axles.

  • Fully adjustable pulling arms and stud adapters are quick and easy to install
  • Includes most common 5/8" - 18 Axle stud Adapter Set; additional adapter sets also available
  • Reduces the risk of damage to axle studs

The head of the Tiger Tool 11001 Axle Shaft Puller is rounded, ensuring the load of the hammer's force is more accurately distributed down the center of the tool. Top grade metals and various treatments safeguard the integrity of the Axle Shaft Puller, enabling it to be struck again and again.

Optional Adapter:

  • 11010 - 1/2" - 20
  • 11015 - 9/16" - 18
  • 11020 - 3/4" - 16
  • 11025 - 1/2" - 13
  • 11030 - 5/8" - 11
  • 11035 - 5/8" - 18
Wheel Guard, 10 Hole 11-1/4" BC, Stud-Piloted 1-1/8" and 7/8" Studs
Prevents rust, scale, corrosion, and galvanic electrolysis on disc wheels. Nylon separator plate, placed between the hub or drum and the wheel, and/or between two wheels on dual applications. The wheel-guard is highly recommended in severe applications where corrosion and/or wear has been identified as a problem. Both aluminum and steel wheels can benefit from wheel-guard.
Wheel Guard, 10 Hole, 285.75mm B.C., Hub-Piloted, 22mm Studs, Unimount
Prevents rust, scale, corrosion, and galvanic electrolysis on disc wheels. Nylon separator plate, placed between the hub or drum and the wheel, and/or between two wheels on dual applications. The wheel-guard is highly recommended in severe applications where corrosion and/or wear has been identified as a problem. Both aluminum and steel wheels can benefit from wheel-guard.
3/4" Drive Micrometer Click-Type Torque Wrench 100-600 ft./lbs.

Features and Benefits:

  • Accuracy: 4% in clockwise direction
  • Thumb screw at base of handle for locking torque setting
  • 5 ft./lbs. graduations
  • 3/4" square drive
Loading...