Are you looking for:

Kiene Mobile Diesel Engine Rebuild Stand -5,000 lb. Capacity

The Kiene Mobile Diesel Engine Rebuild Stand gives the mechanic a safer, more productive working environment

The Mobile Engine Stand provides a secure, stable support for the engine at a comfortable working height. It also makes servicing and rebuilding far easier.

  • Sturdy steel gears support the engine - No hydraulic pump or leak down on this stand
  • Gears provide 3 ratios for lifting the engine to horizontal
  • Easy engine access is provided by two plane Vertical / Horizontal positioning

Fast and Easy Positioning

2-Plane engine positioning (vertical and horizontal) provides a 360 degree swing radius and optimum engine accessibility. Hand crank with speed reducer makes positioning easy.

Solid Working Stability

Angled leg construction provides a steady stand and enables the mechanic to get closer to the work

Great mobility

Moves easily on heavy-duty 5" diameter casters. Brake mechanism enables mechanic to secure stand in place quickly.

Kiene Splined Shaft 1 3/4 in x .983 in Pilot for Clutch Caddy

Kiene 1-3/4" Diameter Splined Shaft with 0.98" diameter pilot for the Clutch Caddy

  • For 0.980" Pilot
  • Steel construction not plastic

Clutch Caddy Sold Separately

Dayton & Dual Wheel Adapter for Big Truck Tire Step - (Adapter Bar Only)

The 5950 Dual Wheel Adapter must be used when using the Big Truck Tire Step on Dayton and dual wheels.

This adapter provides extra stability by resting against the tire when there is no rim to rest against. The Dual Wheel Adapter is included with the 5800 Super Single 2-Step and the 5300 Super Single 3-Step.

The Dual Wheel Adapter can be easily attached to any Big Truck Tire Step by sliding the adapter’s two attachment posts over the step’s rear stabilizing posts. Secure the adapter with the included screws and nuts.

Super Single Model numbers 5800 and 5300 come pre-drilled for the adapter. If using the dual wheel adapter with model numbers 5500 or 5100 you must: 1) Remove vinyl caps. 2) Slide on adapter and mark hole placement. 3) Drill holes in the stabilizing posts. 4) Attach Dual Wheel Adapter.

*Note: This is the adapter bar only. Steps are sold separately.

Tiger Tool Axle Shaft Puller - Medium & Heavy Duty Drive Axles

With the Tiger Tool Axle Shaft Puller you can easily remove even the most seized axle shaft in minutes. The Tiger Tool Axle Shaft Puller works on vehicles ranging from medium-duty up to heavy-duty fitted with Dana, Eaton, or Rockwell drive axles.

  • Fully adjustable pulling arms and stud adapters are quick and easy to install
  • Includes most common 5/8" - 18 Axle stud Adapter Set; additional adapter sets also available
  • Reduces the risk of damage to axle studs

The head of the Tiger Tool 11001 Axle Shaft Puller is rounded, ensuring the load of the hammer's force is more accurately distributed down the center of the tool. Top grade metals and various treatments safeguard the integrity of the Axle Shaft Puller, enabling it to be struck again and again.

Optional Adapter:

  • 11010 - 1/2" - 20
  • 11015 - 9/16" - 18
  • 11020 - 3/4" - 16
  • 11025 - 1/2" - 13
  • 11030 - 5/8" - 11
  • 11035 - 5/8" - 18
Truck Tire Liquid Balance, 32 oz. Bottle [12 bottles per cs]
The ECO-Friendly Way to Balance Tires!
• Instant tire balance for the life of the tire
• Truck tire runs cooler and will extend the tread life by reducing heat build up • Eliminates Rust on Rims
• Lubricates for a perfect Bead Seat
• Tire Changer Friendly
• Will Not block valve stem
• Does not Freeze
• Increases casing retread ability in new and retreaded tires *Sold Only in a case of 12*
Ok to use with TPMS sensors.
Loading...