Are you looking for:

Super Automotive Presets and Computer Memory Saver

Features and Benefits:

  • Unit is self contained, no other equipment needed
  • 12 Volt, 4.5 amp/hour sealed lead acid battery included inside unit
  • LED indicates connection to battery circuit
  • Protected by a 4 amp circuit breaker
  • Direct wired OBD2 connector
Saves all driveability codes and settings when disconnecting a vehicle's power (battery). Power on/ power off switch and includes 120V AC charger. Also protects settings for: anti-theft radio codes, clocks, keyless entry systems, alarms, cellular phone settings and other memory related functions.
Swing Down Step 3-Step Single Handle w/ Adjustable Stake

The Adjustable Swing Down Step flatbed ladder is especially useful on flatbeds and dump trucks where easy and safe access has always been a problem. Thanks to its universal design, it can be mounted into any stake pocket.


FEATURES & BENEFITS:

  • Built-in Grab Handle
  • 2-Way Gas Spring allows for controlled movement up and down
  • Adjustable Model fits all standard pockets
  • Can be padlocked in place
  • Approximately 39" long step section brings it close to the ground for easy access
  • Special tread design provides sure traction
  • Safety yellow powder coat finish
  • Design allows three point contact
  • Latches securely in upright position when not in use
  • Easily moved from vehicle to vehicle
  • Easily installed on new or existing vehicles
  • Heavy Duty steel construction for long life
  • Emerson: Model 110 Air jack/Safety Stand 30,000 lb Capacity (Pair)

    Speed of lifting combined with safety by using safety pins to raise the extensions to the lifting point, while a second safety pin is used to lock the main ram into position once the lifting action has been completed. This feature converts the jack into a safety stand. Four safety positions save valuable time and promotes operator safety.

    Polyurethane is bonded to the lifting saddles for non-slip surface.

    Patented, beveled piston and guide allows the ram to follow the arc of the load without binding. This feature allows smooth lifting and lowering of the load.

    Quick snap detachable handles can be removed in tight working spaces, or for safety purposes.


    Specs:

  • Lowest Height (w/o extension): 15-3/4"
  • High Height (w/extensions): 52"
  • Long extension (adjustable): 24"
  • Short extension: 8"
  • Ram travel: 12"
  • Safety pin positions: 4
  • Base diameter: 11-1/2"
  • Capacity (single): 15,000 lbs
  • Capacity (Pair): 30,000 lbs

  • The rate lifting capacity for a pair of Model 110s is 30,000 lbs with 200 PSI at the air source. Below are the lifting capacities at various air pressures.


  • 100psi: 15,000 lbs
  • 120psi: 18,000 lbs
  • 140psi: 21,000 lbs
  • 160psi: 24,000 lbs
  • 180psi: 27,000 lbs
  • 200psi: 30,000 lbs
  • Hein-Werner High Reach Jack Stands - 10 Ton Capacity

    Features and Benefits:

    • Heavy duty square tubing
    • Adjusts from 30" to 52" in 2" intervals
    • Large saddle securely supports load
    • Integrated wheels for easy positioning
    • Wide, square tubing construction and base for maximum load stability

    Ideal for fleet, agricultural, and construction maintenance. Sold in pars. Base size: 19" x 19"; net weight: 144 lbs.

    Dump-Lok - Dump Body Safety Stand (Wide Top - 6 in Frame)

    Dump-Lok dump bed braces are an engineering breakthrough in the workplace. Dump-Lok dump bed braces safely hold dump boxes at angles higher than most manufacturer body props, giving workers safe access to more areas underneath the dump bed.

    • Sold As A Pair. Intended to be used as a pair
    • Used Universally on any brand dump box
    • Equipped with high grade, high tensile steel chains to further ensure safe repairs
    • Flat Top Model for offset frame beds and trailers
    • Fits up to 5-1/2" flange

    OSHA has issued citations to employers for failing to provide lockout procedures while employees were working under the dump body of dump trucks. They have recognized the hazard of unsecured dump beds and have recommended using an alternative "truck bed brace bracket".

    • Overall Height: 21"
    • Overall Width: 6"
    • Overall Length: 12.75"
    • Maximum Capacity (pair): 50,000 lbs
    Loading...