Are you looking for:

Dayton & Dual Wheel Adapter for Big Truck Tire Step - (Adapter Bar Only)

The 5950 Dual Wheel Adapter must be used when using the Big Truck Tire Step on Dayton and dual wheels.

This adapter provides extra stability by resting against the tire when there is no rim to rest against. The Dual Wheel Adapter is included with the 5800 Super Single 2-Step and the 5300 Super Single 3-Step.

The Dual Wheel Adapter can be easily attached to any Big Truck Tire Step by sliding the adapter’s two attachment posts over the step’s rear stabilizing posts. Secure the adapter with the included screws and nuts.

Super Single Model numbers 5800 and 5300 come pre-drilled for the adapter. If using the dual wheel adapter with model numbers 5500 or 5100 you must: 1) Remove vinyl caps. 2) Slide on adapter and mark hole placement. 3) Drill holes in the stabilizing posts. 4) Attach Dual Wheel Adapter.

*Note: This is the adapter bar only. Steps are sold separately.

IPA Super MUTT Mobile Universal Trailer Tester - Standard Edition 9008-SE

Quickly troubleshoot lighting, air brake and ABS systems with the industry's leading trailer tester. This intuitive and durable design is ideal for both on and off-site commercial trailer testing and repairs.

Electrical Testing (12/24 Volt Operation

  • Power lights: Manually, All-On, Auto Scan, or by Remote Control
  • Audible and visual alerts: cross, open, overloaded, and short circuit indication
  • Pulsar mode allows diagnostic repair
  • Advanced trailer wiring diagnostics
  • Amperage Readout and range (0-20 amps)
  • Cable testing
  • Ground failure detection: differentiates between wire and chassis ground

ABS Testing

  • Access ABS blink codes
  • Test ABS fault blink codes via Auxiliary and Brake Circuit activation (i.e. Meritor/Wabco, Bendix TABS-6 and Haldex systems)

Air Brake Testing

  • Performs leak down test on service and emergency lines
  • Remote control allows observation of slackers to measure and adjust pushrods
  • Real time, repetitive brake activation to find developing problems and verify leaking servo cans
  • Features an internal air regulator

Remote Control

  • 12-button remote control tests all trailer electric circuitry and air brake actuation, 200+ ft. range
  • Sync multiple remotes to one unit

Includes:

  • 12-Button Remote Control
  • 5' 7-Way Cable
  • 8' Glad Hand Hoses
Precision Instruments M2R200HX 3/8" Drive Torque Wrench 30-200 lb.in.

Engineered, precision bearing surfaces extend the calibrated life of the M line to as many as 60,000 cycles or more and ensure the most reliable performance possible. In addition to flawless operation at release, calibration is completely external, unlike traditional mechanism that require disassembly and the replacement of blocks and shims.

  • Drive Size: 3/8"
  • Drive Type: Rigid Ratchet
  • Primary Units: lb.in
  • Capacity: 30-200
  • Increments: 1
  • Effective Length at 20% of Full Scale: 8.18" Effective Length at Full Scale: 7.28"
  • Maximum Overall Length: 9.87"
  • Minimum Overall Length: 8.97"
  • Weight: .85 lbs. (w/plastic case): 1.50 lbs.
  • Finish: Nickel / Chrome
  • Ratchet kit: R21AR-RK
  • Meets or Exceeds the following Specifications: GGG-W-686C, ANSI B107.14M
5 HP 80 Gallon Vertical 2-Stage Electric Reciprocating Air Compressor

Features and Benefits:

  • Start-Stop pressure switch control
  • ASME safety valves fully enclosed belt guard
  • Tank drain and discharge valve
  • 208-230 volt, single phase
  • 2 year full warranty

No magnetic starter required. This compressor comes complete with everything you need to optimize your work and minimize down time. 18.5 cfm @100 PSI.

Loading...