Are you looking for:

Branick Mobile Cart for 7600 Strut Spring Compressor

Features and Benefits:

  • Allows full mobility and a sturdy stand for the BRA7400
9-Pin Caterpillar Adapter W/Thumb Screws for NEXIQ USB Link 1
9-pin Caterpillar adapter with thumb screws. For use with USB-Link 125032, WVL 122048, PDM 126032, Lite Link 551004.
Express Mobile - Light and Air Brake System Tester

Make your service truck investment as productive as possible with an Express Mobile and eliminate most of the walking associated with trailer servicing. you can easily check all lighting functions and the air brake system (including brake adjustment) in just two minutes, start to finish. That's 20 trailers per hour including set-up, disconnect and all walk-time!


  • Designed to be mounted in your service truck. Perfect for on-site trailer readiness inspection
  • Radio remote-controlled air brake tester saves tons of time.
  • Built in Scanner lighting tester operates lights in sequence. Check them all in a single walk around
  • Test airbrake and lighting functions in minutes
  • Integral mounting flanges make installation a snap!
  • Sourced by your service truck's electrical and service air systems
  • User supplied air hoses and trailer cable
  • Includes spare remote
    General Specifications
    Scope of Equipment Trailer lighting systems testing using a circuit scanning sequence with trailer air brake testing using radio remote-controlled air actuation from behind the trailer. Unit is designed for mounting in a service truck.
    Model Designation 01011
    Dimensions 14.88"H x 16.18"W x 5.38"D overall, including mounting flanges
    Cabinet 16-gauge steel, base pan 14-gauge. Weldment forms basic structure. Black winkle finish.
    Mounting Integral mounting flanges on the back and bottom of the cabinet for mounting to floor or interior sidewall of service truck.
    Environmental Weather, dust, oil, overspray, and dirt resistant. Not intended to be mounted outside of the service body
    Light / Electrical Testing Equipment
    Light Testing Equipment Complete built-in Scanner trailer light tester as described below
    Operating Voltage 12 vdc (nominal)
    Wiring Protocol SAE 7-Wire
    Scanned Circuits Left turn (1.5 sec), stop (3.0 sec), right turn (1.5 sec). Circuits are powered one at a time, and the sequence repeats indefinitely
    Freeze feature "Mode Select" switch starts and stop scanning action as needed. Has center "all off" position
    Switched Circuits "On-Off Toggle" switches control aux, marker, and tail light circuits
    Circuit Status Indicator One red LED for each of the six circuits
    Low Battery Indicator One red LED blinks at 11 volts, on steady at 10 volts
    Circuit Breakers Aux, mark, tail - one 20 amp auto-reset circuit breaker. Left, stop, right - one 15 amp auto-reset circuit breaker
    Short Circuit Warning One LED for 20 amp breake, one LED for the 15 amp breaker
    Current Capacity 34 amps total
    Trailer Connection SAE 7-Pole socket mounted on cabinet. Light cord and plugs not provided. these vary with the specifics of each installation
    Power Supply 12 vdc provided by service truck. Requires connection to truck battery's positive terminal, a good ground connection, and connection to the truck's accessory feed (the latter is not a strict requirement but is strongly recommended)
  • Jump-N-Carry 12 Volt Jump Starter - 1100 Peak Amps. 325 Cranking Amps
    Features and Benefits
    • Rugged, durable and reliable 12 Volt jump starting for professional applications
    • Delivers 1100 Peak Amps of jump starting power, 325 cranking amps
    • 23" #4 gauge heavy duty cables for efficient power transfer to vehicle's battery
    • Volt gauge provides an accurate, detailed state of charge for the onboard battery
    • Built in charger will never get lost and works with any US extension cord
    This great entry level professional jump starter features trademark Jump-N-Carry ruggedness, reliability and starting power. It features the Clore PROFORMER battery, specifically designed for vehicle jump starting, to deliver peak professional performance time after time. Includes a 12 volt outlet to power accessories and Product for Life coupon that allows the end purchaser a one-time product repair for a low, fixed fee, regardless of reason for damage/problem. 1 year limited warranty.

    Supercedes: KKJ990056
    3/8" Drive Split-Beam Click Wrench - 100-600 ft-in

    Split-Beam Click Wrenches overcome many of the problems associated with micrometer-style clock wrenches in abusive environments. The wrench has few components, and all critical parts are welded together at assembly. There is no need to "work in" a C series torque wrench before using it the first time. Nor is it necessary to adjust to the lowest torque setting after use. Setting the tool requires only fingertip force since the adjustment mechanism is not under load.

    • Drive Size: 3/8"
    • Drive Type: Flex Ratchet
    • Primary Units: lb.in.
    • Capacity: 100-600
    • Increments: 10
    • Overall Length: 17-5/64"
    • Effective Length: 14-31/64"
    • Width: 1-3/16"
    • Head Height (without square): 9/16"
    • Weight: 1.48 lbs.
    • (w/plastic case): 2.35 lbs.
    • Finish: Nickel / Chrome
    • Ratchet Service Kit: R22BF-RK
    • Meets or Exceeds the following Specifications: GGG-W-686C, ANSI B107.14M
    Loading...