Are you looking for:

1" Drive Super-Heavy Duty 4-Position Impact Wrench

Features and Benefits:

  • Four position regulator allows the operator to match the required power to the job
  • Controllable throttle provides easy bolt starting
  • 7" extended shank for easy access to truck and off-road equipment tires
  • Padded side handle for increased maneuverability
  • Easy to use forward/reverse valve for quick directional changes
  • Maximum torque: 2,000 ft./lbs.
Easy to use forward/reverse valve for quick directional changes.  Ideal for high volume tire work on trucks, buses and heavy equipment.  Working torque range: 370-1600 ft./lbs., 540 blows per minute, Free speed of 4,100 RPM.  Tool is 22.5" in length and weighs 30.5 lbs.
Pumpmaster - 2 System for 55 Gallon Bung Type Drum

Pumpmaster 2 system for 55 Gallon Bung Type Drum

  • Body Material: Metal
  • Dispensing Rate: 8 GPM
  • Graduations: Gallon
  • Hose Length: 5'
  • Inlet Size: 1/4" NPT
  • PSI Rating: 90 PSI
  • Express Mobile - Light and Air Brake System Tester

    Make your service truck investment as productive as possible with an Express Mobile and eliminate most of the walking associated with trailer servicing. you can easily check all lighting functions and the air brake system (including brake adjustment) in just two minutes, start to finish. That's 20 trailers per hour including set-up, disconnect and all walk-time!


  • Designed to be mounted in your service truck. Perfect for on-site trailer readiness inspection
  • Radio remote-controlled air brake tester saves tons of time.
  • Built in Scanner lighting tester operates lights in sequence. Check them all in a single walk around
  • Test airbrake and lighting functions in minutes
  • Integral mounting flanges make installation a snap!
  • Sourced by your service truck's electrical and service air systems
  • User supplied air hoses and trailer cable
  • Includes spare remote
    General Specifications
    Scope of Equipment Trailer lighting systems testing using a circuit scanning sequence with trailer air brake testing using radio remote-controlled air actuation from behind the trailer. Unit is designed for mounting in a service truck.
    Model Designation 01011
    Dimensions 14.88"H x 16.18"W x 5.38"D overall, including mounting flanges
    Cabinet 16-gauge steel, base pan 14-gauge. Weldment forms basic structure. Black winkle finish.
    Mounting Integral mounting flanges on the back and bottom of the cabinet for mounting to floor or interior sidewall of service truck.
    Environmental Weather, dust, oil, overspray, and dirt resistant. Not intended to be mounted outside of the service body
    Light / Electrical Testing Equipment
    Light Testing Equipment Complete built-in Scanner trailer light tester as described below
    Operating Voltage 12 vdc (nominal)
    Wiring Protocol SAE 7-Wire
    Scanned Circuits Left turn (1.5 sec), stop (3.0 sec), right turn (1.5 sec). Circuits are powered one at a time, and the sequence repeats indefinitely
    Freeze feature "Mode Select" switch starts and stop scanning action as needed. Has center "all off" position
    Switched Circuits "On-Off Toggle" switches control aux, marker, and tail light circuits
    Circuit Status Indicator One red LED for each of the six circuits
    Low Battery Indicator One red LED blinks at 11 volts, on steady at 10 volts
    Circuit Breakers Aux, mark, tail - one 20 amp auto-reset circuit breaker. Left, stop, right - one 15 amp auto-reset circuit breaker
    Short Circuit Warning One LED for 20 amp breake, one LED for the 15 amp breaker
    Current Capacity 34 amps total
    Trailer Connection SAE 7-Pole socket mounted on cabinet. Light cord and plugs not provided. these vary with the specifics of each installation
    Power Supply 12 vdc provided by service truck. Requires connection to truck battery's positive terminal, a good ground connection, and connection to the truck's accessory feed (the latter is not a strict requirement but is strongly recommended)
  • Kiene Mobile Diesel Engine Rebuild Stand -5,000 lb. Capacity

    The Kiene Mobile Diesel Engine Rebuild Stand gives the mechanic a safer, more productive working environment

    The Mobile Engine Stand provides a secure, stable support for the engine at a comfortable working height. It also makes servicing and rebuilding far easier.

    • Sturdy steel gears support the engine - No hydraulic pump or leak down on this stand
    • Gears provide 3 ratios for lifting the engine to horizontal
    • Easy engine access is provided by two plane Vertical / Horizontal positioning

    Fast and Easy Positioning

    2-Plane engine positioning (vertical and horizontal) provides a 360 degree swing radius and optimum engine accessibility. Hand crank with speed reducer makes positioning easy.

    Solid Working Stability

    Angled leg construction provides a steady stand and enables the mechanic to get closer to the work

    Great mobility

    Moves easily on heavy-duty 5" diameter casters. Brake mechanism enables mechanic to secure stand in place quickly.

    Premium High Vacuum Pump Oil - Case of 1 Gallon Jugs

    Features and Benefits:

    • Robinair oil has a lower moisture content than other oils
    • Engineered to maintain maximum viscosity at high running temperatures
    • Engineered to improve cold weather starts

    Premium oil for vacuum pumps, 1 case includes (4) 1-gallon jugs.  Robinair’s oil is engineered to maintain maximum viscosity at high running temperatures and to improve cold weather starts.  Laboratory tests prove that Robinair oil is more thermally stable in comparison to other leading brands, which means it resists breaking down due to heat for a longer period of time.  Robinair oil has a lower moisture content than other oils, thanks to our special packaging and handling procedures. Moisture degrades the oil’s purity, thinning it and reducing the pump’s ability to reach a deep vacuum.

     

     

    Loading...