Are you looking for:
Dump-Lok dump bed braces are an engineering breakthrough in the workplace. Dump-Lok dump bed braces safely hold dump boxes at angles higher than most manufacturer body props, giving workers safe access to more areas underneath the dump bed.
- Sold As A Pair. Intended to be used as a pair
- Used Universally on any brand dump box
- Equipped with high grade, high tensile steel chains to further ensure safe repairs
- Flat Top Model for offset frame beds and trailers
- Fits up to 4-7/16" flange - 3-1/2 is standard
OSHA has issued citations to employers for failing to provide lockout procedures while employees were working under the dump body of dump trucks. They have recognized the hazard of unsecured dump beds and have recommended using an alternative "truck bed brace bracket".
- Overall Height: 21"
- Overall Width: 6"
- Overall Length: 12.75"
- Maximum Capacity (pair): 50,000 lbs
Dump-Lok dump bed braces are an engineering breakthrough in the workplace. Dump-Lok dump bed braces safely hold dump boxes at angles higher than most manufacturer body props, giving workers safe access to more areas underneath the dump bed.
- Sold As A Pair. Intended to be used as a pair
- Used Universally on any brand dump box
- Equipped with high grade, high tensile steel chains to further ensure safe repairs
- Flat Top Model for offset frame beds and trailers
- Fits up to 5-1/2" flange
OSHA has issued citations to employers for failing to provide lockout procedures while employees were working under the dump body of dump trucks. They have recognized the hazard of unsecured dump beds and have recommended using an alternative "truck bed brace bracket".
- Overall Height: 21"
- Overall Width: 6"
- Overall Length: 12.75"
- Maximum Capacity (pair): 50,000 lbs
Features and Benefits:
- Has a 2,200 lb capacity
- Maximum height: 36-1/2" with a minimum height of 8-1/4"
- Mounting plate angle is adjusted with the turn of a wrench
- Degree of tilt: 20 degree back, 15 degree forward, 12 degree side to side
- Swiveling pump handle permits ease of operation in restricted working spaces
The 8-1/4" low height is perfect for aerodynamic trucks with low ground clearance. Special mounting adapter (No. 540231) fits popular Eaton® Fuller® RoadRanger® transmissions used on nearly all Class 7 and 8 heavy-duty trucks. Mounting plate angle is adjusted with the turn of a wrench. Degree of tilt: 20° back, 15° forward, 12° side to side. Swiveling pump handle permits ease of operation in restricted working spaces. Fast-acting pump quickly raises lifting arm.
This easy-to-use portable exhaust extraction fan is a practical and affordable solution for effectively removing toxic exhaust fumes from auto repair facilities, motorcycle shops, small engine repair shops and other work areas toxic fume removal is needed.
- Positioned next to the vehicle exhaust, the 3/4 hp high output suction fan captures the fumes and discharges them safely up to 30' away. The height of the fan can be easily adjusted to match the tailpipe height of the vehicle.
- The 3/4 hp, 110v (700cfm) fan is mounted in an integrally molded, high impact polyethylene "flow-thru" case. Height position control requires a simple turn to release and lock the fan onto the aluminum mounting bar.
- The mobile base makes it easy to position so it can be used anywhere exhaust removal is required.
- Check oil pressure in automatic transmissions and engines
- Adapters provide coverage of most domestic and imported cars and light trucks including late models
- Supplied with two gauges calibrated as follows:
- Large Gauge: 0-600PSI, 0-4,000 kPa, 0-40 Bar
- Small Gauge: 0-50PSI, 0-3.5 Bar