Are you looking for:
Features and Benefits:
- Tests 6 and 12-Volt Batteries from 100-2000 CCA
- Tests 12 and 24-Volt starting and charging systems
- Starter voltage drop, diode and four point charging system test
- Applications: Auto/Light Truck, Commercial Group 31 and 4D/8D, Power-Sports, Lawn and Garden, and Marine
- Print capability –order MIDA087 IR printer sold separately
Introducing the all-new MDX-600 Series from Midtronics! The MDX-650 replaces both the MCR-500 and MCR-500XL models. Benefit from Midtronics' 20+ years of experience and innovation gained from selling essential tools to nearly every auto and truck OEM in the world, with the industry standard of conductance technology for battery testing. Fast, safe, simple, and accurate. Quick starter analysis without disabling the ignition. Advanced menu driven interface for a complete charging system analysis in seconds. Includes MDX-600 Series Analyzer with MDX-650 software (installed), manual, stud-Adapters, 10’ removable cables, and tool bag case.
- Engineered to maintain maximum viscosity at high running temperatures
- Thermally stable and long lasting
- Lower moisture content than other oils
- Quart size bottle
- Works with most A/C vacuum pumps
Make your service truck investment as productive as possible with an Express Mobile and eliminate most of the walking associated with trailer servicing. you can easily check all lighting functions and the air brake system (including brake adjustment) in just two minutes, start to finish. That's 20 trailers per hour including set-up, disconnect and all walk-time!
General Specifications | |
Scope of Equipment | Trailer lighting systems testing using a circuit scanning sequence with trailer air brake testing using radio remote-controlled air actuation from behind the trailer. Unit is designed for mounting in a service truck. |
Model Designation | 01011 |
Dimensions | 14.88"H x 16.18"W x 5.38"D overall, including mounting flanges |
Cabinet | 16-gauge steel, base pan 14-gauge. Weldment forms basic structure. Black winkle finish. |
Mounting | Integral mounting flanges on the back and bottom of the cabinet for mounting to floor or interior sidewall of service truck. |
Environmental | Weather, dust, oil, overspray, and dirt resistant. Not intended to be mounted outside of the service body |
Light / Electrical Testing Equipment | |
Light Testing Equipment | Complete built-in Scanner trailer light tester as described below |
Operating Voltage | 12 vdc (nominal) |
Wiring Protocol | SAE 7-Wire |
Scanned Circuits | Left turn (1.5 sec), stop (3.0 sec), right turn (1.5 sec). Circuits are powered one at a time, and the sequence repeats indefinitely |
Freeze feature | "Mode Select" switch starts and stop scanning action as needed. Has center "all off" position |
Switched Circuits | "On-Off Toggle" switches control aux, marker, and tail light circuits |
Circuit Status Indicator | One red LED for each of the six circuits |
Low Battery Indicator | One red LED blinks at 11 volts, on steady at 10 volts |
Circuit Breakers | Aux, mark, tail - one 20 amp auto-reset circuit breaker. Left, stop, right - one 15 amp auto-reset circuit breaker |
Short Circuit Warning | One LED for 20 amp breake, one LED for the 15 amp breaker |
Current Capacity | 34 amps total |
Trailer Connection | SAE 7-Pole socket mounted on cabinet. Light cord and plugs not provided. these vary with the specifics of each installation |
Power Supply | 12 vdc provided by service truck. Requires connection to truck battery's positive terminal, a good ground connection, and connection to the truck's accessory feed (the latter is not a strict requirement but is strongly recommended) |
The Kiene Mobile Diesel Engine Rebuild Stand gives the mechanic a safer, more productive working environment
The Mobile Engine Stand provides a secure, stable support for the engine at a comfortable working height. It also makes servicing and rebuilding far easier.
- Sturdy steel gears support the engine - No hydraulic pump or leak down on this stand
- Gears provide 3 ratios for lifting the engine to horizontal
- Easy engine access is provided by two plane Vertical / Horizontal positioning
Fast and Easy Positioning
2-Plane engine positioning (vertical and horizontal) provides a 360 degree swing radius and optimum engine accessibility. Hand crank with speed reducer makes positioning easy.
Solid Working Stability
Angled leg construction provides a steady stand and enables the mechanic to get closer to the work
Great mobility
Moves easily on heavy-duty 5" diameter casters. Brake mechanism enables mechanic to secure stand in place quickly.
Weight: 1.15 lbs