Are you looking for:

Scorpion Jack TJ12 Stationary 25,000 lb. capacity Truck Jack

The Scorpion Installed In-Ground lift is semi-recessed in your shop floor. This is a semi-inground installation is an ideal solution for those shops that perform a lot of tire service and Brake Service. This is an installed version of the ScorpionTJ12 service jack and it offers a perfect combination of speed, efficiency, ease of use and value. The Scorpion Installed lifts are much less expensive than your standard above- ground options or for that matter the in-ground options too.


These jacks are designed to lift the vehicle across the axle using the lifting saddles provided (Low/Med/Hi). So you lift the whole front end or axle assembly in one go. There is a tire spotting dish for quick set up, and a remote control to allow the operator to check the load.


There is a built in lock for safety and other convenience features.


The lifts come with a control station housing the pump unit and a 20 Ft. Remote control so the operator can spot the load.


Features:

  • 25,000 Lb capacity
  • Dual hydraulic rams for lifting
  • Lift over 20" with a built in safety lock
  • Lift across the axle with the lifting saddles or lift on the frame
  • Heavy-duty hydraulics and air motor

  • Choose between:

  • Above Ground install - 8" Driver Over Height
  • Semi In-Ground install - 4.25" Drive Over Height
  • In-Ground Install - Flush mount with 0" Driver Over Height
  • 18" x 18" x 48" Black Steel Underbody Truck Toolbox w/ T-Latch
    • Perfect balance of security and weather resistance with a durable 14 Ga steel body and black powder-coated finish.
    • Helps keep box contents safe and secure behind a recessed drop door and continuous hidden hinge.
    • Protect against weather and theft with locking stainless steel compression latch.
    • Can be mounted on either a flat surface or under-bed.
    • Built to last with aircraft grade cables and a replaceable gasket sealing system.
    • Made in the USA.

    Protect and easily access your equipment with the Buyers Products Black Steel Underbody Truck Box with T-Latch. Available in a variety of sizes, each professional grade box is made of strong 14 Ga steel with a 12 Ga drop door that can handle the harshest job sites. Then it's powder coated black inside and out for superior corrosion resistance and style.

    The continuous hidden hinge and replaceable gasket system keep weather and grime away from your tools. Aircraft grade cables help prevent damage. The locking, stainless steel compression latch provides a tight seal and deters theft.

    Mount the box on any flat surface or under your truck using Buyers Products Mounting Brackets (sold separately, see "Accessories" below).

    H x D x W Size: 18" x 18" x 48"

    Number of Latches: 2

    Buyers Black Steel Underbody Truck Toolbox W/ T-Latch (18 x 18 x 24)
    • Perfect balance of security and weather resistance with a durable 14 Ga steel body and black powder-coated finish.
    • Helps keep box contents safe and secure behind a recessed drop door and continuous hidden hinge.
    • Protect against weather and theft with locking stainless steel compression latch.
    • Can be mounted on either a flat surface or under-bed.
    • Built to last with aircraft grade cables and a replaceable gasket sealing system.
    • Made in the USA.

    Protect and easily access your equipment with the Buyers Products Black Steel Underbody Truck Box with T-Latch. Available in a variety of sizes, each professional grade box is made of strong 14 Ga steel with a 12 Ga drop door that can handle the harshest job sites. Then it's powder coated black inside and out for superior corrosion resistance and style.

    The continuous hidden hinge and replaceable gasket system keep weather and grime away from your tools. Aircraft grade cables help prevent damage. The locking, stainless steel compression latch provides a tight seal and deters theft.

    Mount the box on any flat surface or under your truck using Buyers Products Mounting Brackets (sold separately, see "Accessories" below).

    Buyers # 1702300

    H x D x W Size: 18" x 18" x 24"

    Number of Latches: 1

    Diamond Tread Aluminum Topsider Truck Box Series - 18" x 16" x 90"
  • Large 12" tall door opening and the recessed door frame provide easy access to spacious storage area
  • Full-length continuous hinge on doors offers a sturdy, durable and smooth performance
  • Heavy-duty steel support legs mount directly into bed floor, not into fender
  • Contractor grade diamond bright tread aluminum box
  • Thick 3" wide rubber pad protects truck side rail
  • No drilling in side rail; J-bolts fasten under bed lip
  • Stainless steel die cast T-handle compression latch with lock for security
  • Full-weather stripping keeps moisture and dust out
  • Individually boxed for shipping
  • Two doors

  • Buyers # 1701565

    H x D x W Size: 18" x 16" x 90"

    Kiene Wheel Wiz Hub-Piloted Wheel Puller - With Drive Axle Socket (WW2151)

    The Kiene Wheel Whiz is the proven successful way to remove seized hub-piloted wheels.

    The Kiene Wheel Whiz is the original hub-piloted wheel puller used for transit buses and other heavy-duty fleet applications.

    • The Wheel Whiz quickly and safely removes seized hub-piloted wheels from steering, drive and trailer axles.
    • The Wheel Whiz uses five pulling chains to remove even the most stubborn wheels safely and allow the vehicle to be returned to service quickly.
    • The Wheel Whiz works effectively on steel or aluminum wheels.
    Pulling Chain Options
    • WW2101: Steel wheels with 4" and large hand holes
    • WW2102: Aluminum wheels with 1-5/8" holes
    • WW2104: Wheels with 1-1/2" holes
    • WW2105: Supersingles
    • WW2107: Ford 350 & UPS package cars
    • WW2108: Steel wheel with 2.9" diameter holes
    • WW2109: Two hole wheels with valve stem interference
    Hub Socket Options
    • WW2151: Drive Axle Socket - Fits most Eaton & Meritor(Rockwell) drive axles
    • WW2152: Mini-Bus Socket - Fits most smaller hub caps on some buses
    • WW2153: Bus Steering Axle & Euclid Trailer Socket - CR1798, Stemco 343-4176 & 343-4080 and Euclid hub caps
    • WW2154: Trailer Socket - Fits most Stemco hub caps and CR1643 & CR1743
    • WW2155: Freuhauf Trailer Socket
    • WW2156: Pro Par Trailer Socket: Fits Pro Par hub caps
    Loading...