Are you looking for:

Kiene Pulling Chain For Wheel Grabber - Individual

Replacement Chain for Wheel Grabber. Chains are sold individually.

Chain Types & Usage:

  • Part # WW2101 - Steel wheels with 4" and larger hand holes.
  • Part # WW2102 - Aluminum wheels with 1-5/8" to 2-1/4" holes
  • Part # WW2107 - Ford 350 & UPS package cars
  • Part # WW2108 - Steel wheels with 2.9" diameter holes

About the Wheel Grabber

Galvanic electrolysis can literally freeze hub piloted wheels on their hub. In fact they can become so frozen to their hub that it can become a serious safety problem trying to remove them. Do any of the following techniques sound familiar: Swinging a 20 lb. sledge at the tire (hope your arms and back hold out); Placing a porta power between the frame and wheel (stand back); Loosening the lug nuts and driving the vehicle around the block (and hope the wheels don't fall off before you get back to the garage). It sounds strange, but unfortunately these are some of actual techniques that have been used.

  • Works effectively on steel or aluminum wheels, drive axle, steer axle, or trailer.
  • Great for mobile service work.

The Pulling Chains are hooked into the hand holes and their Safety Hooks are attached to the Wheel Grabber. Next, the Hub Socket is centered on the wheel hub. An impact wrench, applied to the Forcing Screw, uniformly tightens the Pulling Chains until the seized wheel is freed - without damage to the wheel or hub! SAFE, QUICK, SIMPLE!

7.5HP 80 Gallon Vertical Two Stage Electric Air Compressor

Features and Benefits:

  • Start-Stop pressure switch control
  • ASME safety valves fully-enclosed belt guard
  • Tank drain and discharge valve
  • 208-230 volt, single phase
  • 2 year full warranty

This compressor comes complete with everything you need to optimize your work and minimize down time. 25.3 cfm @ 100 PSI.

Quick Changer Oil Drain Plug - 1/2 in - 20 UNF

Changing your oil can be a messy, time-consuming task. Waiting for the engine to cool wastes valuable shop time. Spilled hot oil makes a mess and, it can burn!

Now convert every vehicle into a Quick-Changer vehicle.

Now you can eliminate these hassles by replacing your standard oil drain plugs with the innovative Quick Changer oil-drain system. It takes only a few minutes, with no special tools required.

Once you've installed the Quick Changer oil drain valve, you can quickly and easily drain the oil at any time, even when the engine is hot. Actually, draining the oil at high temperatures results in a cleaner flush, since the larger dirt particles drain out with the oil.

No more stripped-out oil pans.

Just connect the drain hose to the Quick-Changer valve, which opens automatically. When finished, disconnect the hose. The valve shuts automatically and cleanly. No more mess. No more spilled oil.

Best of all, by eliminating conventional drain plugs, the Quick Changer system prevents oil-pan threads from being stripped. Your oil pans last longer, saving you money. The valve doesn't extend beyond the threaded portion of the drain.

Just look at these Quick-Changer advantages:

  • Eliminates stripped threads and frozen drain plugs
  • Is fully leak-proof unique design prevents accidental valve openings
  • Draws oil samples quickly and easily, with full control over oil flow
  • Valve and drain assembly fabricated in corrosion-resistant brass
  • Available in metric and U.S. sizes to fit all engines
  • Safe, clean, environmentally friendly operation
  • Meets rigorous independent test lab standards
  • Drains oil faster than conventional drain plugs
25 Gal Self-Evacuating Oil Drain with "Big Mouth" Trans Drain Pan

The "Big Mouth" Transmission Drain Pan is designed for long pan transmissions. It catches all of the drainage during vehicle servicing.

  • Measures: 37" L x 22" W x 7" H
  • 50% larger than most other pans
  • Made of High-Impact polyethylene plastic
  • Adapts to any drain with a 6" or larger diameter funnel

Includes:

  • JDI-25HDC Heavy Duty Self-Evac Oil Drain 25-Gallons
  • JD-2436 Big Mouth Transmission Drain Pan
17-Gallon Low Profile Portable Oil Drain W/Self-Evacuating Kit

Designed for use with heavy-duty trucks, buses, RVs and other low-profile heavy-duty equipment, this rugged steel construction stands up to the toughest shop conditions. You can use as a gravity drain, pump assist evacuation system, or the optional air evacuation kit.

  • 10" ground clearance
  • 17-gallon capacity reservoir
  • Heavy-duty 6" industrial casters for easy maneuvering around the shop
  • Long-reach T-handle folds down flat for storage
  • Expanded metal shield reduces splash
  • All steel construction
  • Enclosed reservoir to prevent spilling during transport
  • Gate valve for gravity draining
  • Size 48"l x 25"w x 10"h

Air Evacuating Kit (Included)

This oil drain is a self-evacuating drain when used with the self-evac kit. Using regular shop air, oil is easily transferred from the drain to the storage receptacle. Kit includes air regulator and safety relief valve, 10' evacuation hose, drain plug and mounting hardware.

Includes:

  • JDI-LP4 Low-Profile Oil Drain 17-Gallons
  • JDI-EK Air Evacuation Kit
Loading...