Are you looking for:

NEXIQ USB-Link 2 & 3 6- And 9-Pin Deutsch Adapter

NEXIQ Technologies' 6 and 9 Pin Deutsch Cable is the standard adapter for most heavy-duty vehicles.

The 493148 cables 6 pin adapter is compatible with class 4-8 Heavy Duty OEM and Tier 1 suppliers (1995 - present)

  • J1708
  • ALDL
  • 160 Baud
  • The 9 493148 cables 9 pin adapter is compatible with class 4-8 Heavy Duty OEM and Tier 1 suppliers (1998 - present)

  • J1708
  • J1939
  • CAN1
  • CAN2
  • CAN3
  • The NEXIQ 493148 6 and 9 Pin Adapter connects to the USB Link 2 & 3

    IPA Super MUTT Mobile Universal Trailer Tester - Standard Edition 9008-SE

    Quickly troubleshoot lighting, air brake and ABS systems with the industry's leading trailer tester. This intuitive and durable design is ideal for both on and off-site commercial trailer testing and repairs.

    Electrical Testing (12/24 Volt Operation

    • Power lights: Manually, All-On, Auto Scan, or by Remote Control
    • Audible and visual alerts: cross, open, overloaded, and short circuit indication
    • Pulsar mode allows diagnostic repair
    • Advanced trailer wiring diagnostics
    • Amperage Readout and range (0-20 amps)
    • Cable testing
    • Ground failure detection: differentiates between wire and chassis ground

    ABS Testing

    • Access ABS blink codes
    • Test ABS fault blink codes via Auxiliary and Brake Circuit activation (i.e. Meritor/Wabco, Bendix TABS-6 and Haldex systems)

    Air Brake Testing

    • Performs leak down test on service and emergency lines
    • Remote control allows observation of slackers to measure and adjust pushrods
    • Real time, repetitive brake activation to find developing problems and verify leaking servo cans
    • Features an internal air regulator

    Remote Control

    • 12-button remote control tests all trailer electric circuitry and air brake actuation, 200+ ft. range
    • Sync multiple remotes to one unit

    Includes:

    • 12-Button Remote Control
    • 5' 7-Way Cable
    • 8' Glad Hand Hoses
    Dayton & Dual Wheel Adapter for Big Truck Tire Step - (Adapter Bar Only)

    The 5950 Dual Wheel Adapter must be used when using the Big Truck Tire Step on Dayton and dual wheels.

    This adapter provides extra stability by resting against the tire when there is no rim to rest against. The Dual Wheel Adapter is included with the 5800 Super Single 2-Step and the 5300 Super Single 3-Step.

    The Dual Wheel Adapter can be easily attached to any Big Truck Tire Step by sliding the adapter’s two attachment posts over the step’s rear stabilizing posts. Secure the adapter with the included screws and nuts.

    Super Single Model numbers 5800 and 5300 come pre-drilled for the adapter. If using the dual wheel adapter with model numbers 5500 or 5100 you must: 1) Remove vinyl caps. 2) Slide on adapter and mark hole placement. 3) Drill holes in the stabilizing posts. 4) Attach Dual Wheel Adapter.

    *Note: This is the adapter bar only. Steps are sold separately.

    OBDII Adapter for US13 Mack/Volvo Powered Trucks for Original NEXIQ USB Link 1

    The NEXIQ adapter cable provides interface between USB-Link and US13 Mack/Volvo Powered Trucks.

    Coverage:

    • 2013 to Present
    • Connects to US12 Mack/Volvo Powered Trucks

    For use with USB-Link 125032 and Wireless Vehicle Link 2 (WVL2) 129048

    NOTE:  This adapter is designed to be compatible ONLY with the original USB-Link.  Order P/N 493013 if you are needing to purchase the OBD-II J1962 Adapter for a USB-Link 2 (Either P/N 124032 or 124034).

    Kiene: Adapter, Ermeto End 1/2" - 20, 20 LH(M) with 60 Degree Seat x 1/2 - 20 LH(F)
    Adapter, Ermeto End 1/2" - 20, 20 LH(M) with 60 Degree Seat x 1/2 - 20 LH(F) for DT-1300 Diesel Injector Nozzle Tester
    Loading...