Are you looking for:
Make your service truck investment as productive as possible with an Express Mobile and eliminate most of the walking associated with trailer servicing. you can easily check all lighting functions and the air brake system (including brake adjustment) in just two minutes, start to finish. That's 20 trailers per hour including set-up, disconnect and all walk-time!
General Specifications | |
Scope of Equipment | Trailer lighting systems testing using a circuit scanning sequence with trailer air brake testing using radio remote-controlled air actuation from behind the trailer. Unit is designed for mounting in a service truck. |
Model Designation | 01011 |
Dimensions | 14.88"H x 16.18"W x 5.38"D overall, including mounting flanges |
Cabinet | 16-gauge steel, base pan 14-gauge. Weldment forms basic structure. Black winkle finish. |
Mounting | Integral mounting flanges on the back and bottom of the cabinet for mounting to floor or interior sidewall of service truck. |
Environmental | Weather, dust, oil, overspray, and dirt resistant. Not intended to be mounted outside of the service body |
Light / Electrical Testing Equipment | |
Light Testing Equipment | Complete built-in Scanner trailer light tester as described below |
Operating Voltage | 12 vdc (nominal) |
Wiring Protocol | SAE 7-Wire |
Scanned Circuits | Left turn (1.5 sec), stop (3.0 sec), right turn (1.5 sec). Circuits are powered one at a time, and the sequence repeats indefinitely |
Freeze feature | "Mode Select" switch starts and stop scanning action as needed. Has center "all off" position |
Switched Circuits | "On-Off Toggle" switches control aux, marker, and tail light circuits |
Circuit Status Indicator | One red LED for each of the six circuits |
Low Battery Indicator | One red LED blinks at 11 volts, on steady at 10 volts |
Circuit Breakers | Aux, mark, tail - one 20 amp auto-reset circuit breaker. Left, stop, right - one 15 amp auto-reset circuit breaker |
Short Circuit Warning | One LED for 20 amp breake, one LED for the 15 amp breaker |
Current Capacity | 34 amps total |
Trailer Connection | SAE 7-Pole socket mounted on cabinet. Light cord and plugs not provided. these vary with the specifics of each installation |
Power Supply | 12 vdc provided by service truck. Requires connection to truck battery's positive terminal, a good ground connection, and connection to the truck's accessory feed (the latter is not a strict requirement but is strongly recommended) |
The Kiene Mobile Diesel Engine Rebuild Stand gives the mechanic a safer, more productive working environment
The Mobile Engine Stand provides a secure, stable support for the engine at a comfortable working height. It also makes servicing and rebuilding far easier.
- Sturdy steel gears support the engine - No hydraulic pump or leak down on this stand
- Gears provide 3 ratios for lifting the engine to horizontal
- Easy engine access is provided by two plane Vertical / Horizontal positioning
Fast and Easy Positioning
2-Plane engine positioning (vertical and horizontal) provides a 360 degree swing radius and optimum engine accessibility. Hand crank with speed reducer makes positioning easy.
Solid Working Stability
Angled leg construction provides a steady stand and enables the mechanic to get closer to the work
Great mobility
Moves easily on heavy-duty 5" diameter casters. Brake mechanism enables mechanic to secure stand in place quickly.
Features and Benefits:
- Clearly see all filtration and drying steps
- Activated charcoal eliminates the need for a coalescing filter
- One piece disposable/replaceable cartridge
- No more loose beads
- Made in the USA
5 stage filtration includes: 1) 40 micron sintered bronze element. 2) Oil removing activated charcoal 3) sintered bronze filter seperates charcoal from desiccant. 4) desiccant beads lower the dew point to -30 deg. F. 5) 40 micron sintered bronze filter prevents desiccant dust from entering the system. The unit comes with a safety guard. A particulate pre filter is recommended to assure proper desiccant life. When the beads change from blue to pink, simply remove/replace the old cartridge. This unit is recommended to be used with a refrigerated dryer or in smaller, low volume shops.
- Complete kit for testing compression of gasoline engines on domestic and foreign cars and trucks plus motorcycles, snow mobiles and lawn mowers
- Adapters provided for 10mm, 12mm, 14mm and 18mm applications
- Flex hose eliminates need to remove auxiliary equipment such as power brakes and steering, air conditioning and manifold
- Screw-in adapters guarantee accuracy over push-in type testers
- Comes in a molded plastic storage case
- Rugged, durable and reliable 12 Volt jump starting for professional applications
- Delivers 1100 Peak Amps of jump starting power, 325 cranking amps
- 23" #4 gauge heavy duty cables for efficient power transfer to vehicle's battery
- Volt gauge provides an accurate, detailed state of charge for the onboard battery
- Built in charger will never get lost and works with any US extension cord
Supercedes: KKJ990056