Are you looking for:
The NEXIQ adapter cable provides interface between USB-Link and US13 Mack/Volvo Powered Trucks.
Coverage:
- 2013 to Present
- Connects to US12 Mack/Volvo Powered Trucks
For use with USB-Link 125032 and Wireless Vehicle Link 2 (WVL2) 129048
NOTE: This adapter is designed to be compatible ONLY with the original USB-Link. Order P/N 493013 if you are needing to purchase the OBD-II J1962 Adapter for a USB-Link 2 (Either P/N 124032 or 124034).
Please See Coverages Tab for Exact Models and Years for fit
Whether it’s the mud and snow off your booths or your morning coffee, the latest innovation from Minimizer is designed to protect the floor of your truck for years to come.
The engineers at Minimizer use cutting edge technology to scan the interior measurements and angles of each specific make and model semi cab to ensure an exact fit. A retention hook mounted to the base of the stick shift is designed to keep your floor mat in place.
- Our tray system was designed to be removed easily for quick cleaning. In a matter of seconds you can have your Floor Mats looking new and reinstalled so you can get your truck back on the road.
- The textured surface will ensure your boots always get a solid grip. They will not break or crack under extreme conditions and are backed by a Lifetime Manufacturers Warranty.
- Made out of a proprietary thermoplastic, the Floor Mats are designed to hold up to the daily abuse of the heavy duty trucking industry.
Brute 47" LosiderSafe - w/Rear Bedsafe Roller Drawer - Commercial Class - Drivers Side - Black
- Low Profile Above Bed Rail
- Increased Rear View Vision
- Beveled Lid Design
- Full Rubber Weather Seal
- Full Metal Shield Protecting Latches
- 2 Gas Props in Upper Compartment
- Extra Wide Design
- Made with .063" Thick Aluminum Diamond Tread
- Fully Reinforced Lid
- "J" Hook, No Drill Into Side Rail Installation
- Top Opening Compartment w/Removable Dividers
- Rear Bedsafe Roller Drawer Comes Equipped w/Removable Dividers
- Single Touch Safety Plunger Latch on Drawer
Dimensions:
- Length: 47"
- Top Width: 17"
- Height: 15-1/2"
- Bottom Width: 11-1/2"
- Bottom Height: 11"
- Converts incandescent turn signal lights to LED while maintaining proper flash rate.
- Your choice of blunt cut leads or female PL-3 plug.
Buyers Products DOT Turn Signal Equalizer Plugs have a 50W rating and allow you to convert incandescent turn signal lights to LEDs, while maintaining proper flash rate.
Plugs are available with a male PL-3 plug and your choice of blunt cut leads or a female PL-3 plug.
Product Common Use: Turn Signal Lights, Incandescent Lights
Please See Coverages Tab for Exact Models and Years for fit
Whether it’s the mud and snow off your booths or your morning coffee, the latest innovation from Minimizer is designed to protect the floor of your truck for years to come.
The engineers at Minimizer use cutting edge technology to scan the interior measurements and angles of each specific make and model semi cab to ensure an exact fit. A retention hook mounted to the base of the stick shift is designed to keep your floor mat in place.
- Our tray system was designed to be removed easily for quick cleaning. In a matter of seconds you can have your Floor Mats looking new and reinstalled so you can get your truck back on the road.
- The textured surface will ensure your boots always get a solid grip. They will not break or crack under extreme conditions and are backed by a Lifetime Manufacturers Warranty.
- Made out of a proprietary thermoplastic, the Floor Mats are designed to hold up to the daily abuse of the heavy duty trucking industry.